EasyManuals Logo

HIKVISION DS-K1T321 Series User Manual

HIKVISION DS-K1T321 Series
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
3) Set the selected aendance status's start me of the day.
4) Press OK.
5) Repeat step 1 to 4 according to your actual needs.
Note
The aendance status will be valid within the congured schedule.
Result
When you authencate on the inial page, the authencaon will be marked as the congured
aendance status according to the congured schedule.
Example
If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's
authencaon from Monday 11:00 to 12:00 will be marked as break.
7.5.4 Set Manual and Auto
Aendance via Device
Set the aendance mode as Manual and Auto, and the system will automacally change the
aendance status according to the congured schedule. At the same me you can manually
change the aendance status aer the authencaon.
Before You Start
Add at least one user, and set the user's authencaon mode. For details, see User Management.
Steps
1.
Select Plaorm Aendance to enter the sengs page.
2.
Set the
Aendance Mode as Manual and Auto.
Figure 7-14 Manual and Auto Mode
DS-K1T321 Series Face Recognion Terminal User Manual
44

Table of Contents

Other manuals for HIKVISION DS-K1T321 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1T321 Series and is the answer not in the manual?

HIKVISION DS-K1T321 Series Specifications

General IconGeneral
BrandHIKVISION
ModelDS-K1T321 Series
CategoryTouch terminals
LanguageEnglish

Related product manuals