HIKVISION DS-K1T321 Series User Manual

8.4.11 Set Privacy Parameters
Set the display sengs, picture upload and storage parameters.
Tap
→ Conguraon → Security → Privacy Sengs .
Authencaon Sengs
Picture Display/Name Display/Employee ID
You can tap to enable Picture, Name, or Employee ID to display. When authencaon is
completed, the system will display the selected contents in the result.
Name De-idencaon
The name informaon is desensized with an asterisk.
Picture Uploading and Storage
You can upload and store pictures.
Save Registered Picture
The registered face picture will be saved to the system if you enable the funcon.
Save Picture When Auth.
If you enable this funcon, you can save the picture when authencang to the device.
Upload Captured Picture When Auth.
Upload the pictures captured when authencang to the plaorm automacally.
Save Pictures Aer Linked Capture
If you enable this funcon, you can save the picture captured by linked camera to the device.
Upload Picture
Aer Linked Capture
Upload the pictures captured by linked camera to the plaorm automacally.
8.4.12 Password Mode
Before conguring passwords, it is necessary to clarify whether the password is a device-set
personal PIN or a
plaorm-applied personal PIN. If it is a device-set personal PIN, it can be created
or edited on the device or on the web, and cannot be set on other plaorms; If it is a plaorm-
applied
personal PIN, it can be created or edited on the plaorm, and issued to the device before it
can be used. It cannot be set on the device or on the web.
Steps
1.
Tap → Conguraon → Security → Password Mode
Device-Set Personal PIN
It can be created or edited on the device or on the web, and cannot be set on other
plaorms.
DS-K1T321 Series Face Recognion Terminal User Manual
75

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English