HIKVISION DS-K1T321 Series User Manual

You will not view or congure the aendance status on the inial page. And the system will follow
the aendance rule that congured on the plaorm.
7.5.2 Set Manual Aendance via Device
Set the aendance mode as manual, and you should select a status manually when you take
aendance.
Before You Start
Add at least one user, and set the user's
authencaon mode. For details, see User Management.
Steps
1.
Select Plaorm Aendance to enter the sengs page.
2.
Set the Aendance Mode as Manual.
Figure 7-12 Manual Aendance Mode
3.
Enable the Aendance Status Required.
4.
Enable a group of
aendance status.
Note
The Aendance Property will not be changed.
5.
Oponal: Select an status and change its name if required.
The name will be displayed on the T & A Status page and the authencaon result page.
Result
You should select an aendance status manually aer authencaon.
DS-K1T321 Series Face Recognion Terminal User Manual
42

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English