HIKVISION DS-K1T321 Series User Manual

7.12 Set Access Control Parameters
You can set the access control permissions, including the funcons of authencaon mode, enable
NFC card, enable M1 card, door contact, open duraon (s) and authencaon interval (s).
On the home page, select ACS (Access Control Sengs) to enter the Access Control Sengs page.
Edit the access control parameters on this page.
Figure 7-16 Access Control Parameters
The available parameters descripons are as follows:
Table 7-2 Access Control Parameters
Descripons
Parameter Descripon
Terminal Authencaon Mode Select the face recognion terminal's authencaon mode. You
can also customize the authencaon mode.
DS-K1T321 Series Face Recognion Terminal User Manual
51

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English