HIKVISION DS-K1T321 Series User Manual

Sleeping (s)
Set the device sleeping waing me (s). For example, when you are on the inial page and if
you set the sleeping
me to 30 s, the device will sleep aer 30 s without any operaon.
Note
20 s to 999 s are available to congure.
Select Language
Select the language according to actual needs.
Supplement Light
Set the white light mode, brightness, start me and end me.
Video Standard
PAL
25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East
countries, Europe countries, etc.
NTSC
30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the
Philippines, etc.
7.10 Password Management
You can change device password.
Steps
1.
Long press OK and login the device. Select System Sengs → Basic → Password .
2.
Select Change Password. Enter the old password.
3.
Enter the new password and
conrm it.
4.
Select OK.
Note
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
two kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can
beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
service provider and/or end-user.
DS-K1T321 Series Face Recognion Terminal User Manual
49

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English