HIKVISION DS-K1T321 Series User Manual

Figure 8-2 DST
2.
Tap Enable DST.
3.
Set the start
me, end me, and DST bias.
4.
Tap Save.
8.4.4 User Management
Steps
1.
Tap → User Management → User Management → admin to enter the seng page.
2.
Enter the old password and create a new password.
3.
Conrm the new password.
4.
Tap Save.
Note
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using 8-16 characters, including at least two kinds
of following categories: upper case leers, lower case leers, numbers, and special characters)
in order to increase the security of your product. And we recommend you change your password
regularly, especially in the high security system, changing the password monthly or weekly can
beer protect your product.
8.4.5 Network Sengs
You can set the wired network, Wi-Fi parameters and device port.
Wired Network
Set wired network.
DS-K1T321 Series Face Recognion Terminal User Manual
59

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English