HIKVISION DS-K1T321 Series User Manual

2.
Secure the mounng plate on the gang box with two supplied screws (SC-KA4X25). Route the
cable through the cable hole, wire the cables and insert the cables in the gang box.
Figure 3-2 Install Mounng Plate
3.
Align the device with the mounng plate, and secure the device on the mounng plate with 1
supplied screw (SC-CM3X8-B-T10-SUS).
DS-K1T321 Series Face Recognion Terminal User Manual
5

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English