HIKVISION DS-K1T321 Series User Manual

If the device has been connected to Hik-Connect and network, when there is a new
installaon package in Hik-Connect, you can select Device Upgrade → Online Update to
upgrade the device system.
Update via USB
Plug the USB ash drive in the device USB interface. Select Device Upgrade → Update via
USB , and the device will read the digicap.dav le in the USB ash drive to start upgrading.
User Manual
You can scan the QR code to view the user manual.
Restore to Factory
Sengs
All parameters will be restored to the factory sengs. The system will reboot to take eect.
Restore to Default Sengs
All parameters, except for the communicaon sengs, remotely imported user informaon, will
be restored to the default sengs. The system will reboot to take eect.
Reboot
The device will reboot aer the conrmaon.
Select System Informaon → , long press OK, and enter admin password to set the face
Face Parameter
Custom
An-Spoong Detecon
Face Liveness Level
Aer enabling face an-spoong funcon, you can set the matching security level
when performing live face authencaon.
An-Spoong Detecon Threshold
The larger the value, the smaller the false accept rate and the larger the false
rejecon
rate. The smaller the value, the larger the false accept rate and the smaller the false
rejecon rate.
Lock Face for An-Spoong Protecon
Aer
enabling this funcon, the device will lock automacally when an-spoong
detecon failed.
Lock Duraon
The lock duraon aer enabling Lock Face for An-Spoong Protecon when an-
spoong
detecon failed.
Version Informaon
You can view the device informaon.
DS-K1T321 Series Face Recognion Terminal User Manual
55

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English