HIKVISION DS-K1T981 Series

Note
Biometric
recognion products are not 100% applicable to an-spoong environments. If you
require a higher security level, use mulple authencaon modes.
Live Face Detecon Security Level
Aer enabling the face an-spoong funcon, you can set the matching security level when
perf
orming live face authencaon.
Recognion Distance
Select the distance between the authencang user and the device camera.
Applicaon Mode
Select the installaon angle as desired.
Note
You can set the angle as 0 or 15 degree.
Installaon Angle
Select either other
s or indoor according to actual environment.
Face Recognion Mode
Normal Mode
Recognize face via the camera normally.
Deep Mode
In the deep mode, you can add the face pictures only via the user adding funcon of the
de
vice or the enrollment staon. It is not supported to add face pictures via pictures
imporng.
Note
The two modes cannot be compable with each other. Do not change the mode once it is
select
ed. If you change the mode, all face pictures of the previous mode will be cleared.
Connuous Face Recognion Interval
Se
t the me interval between two connuous face recognions when authencang.
Pitch Angle
The maximum pitch angle when starng face authencaon.
Yaw Angle
The ma
ximum yaw angle when starng face authencaon.
Face Grading
Set the face grading according to your needs.
1:1 Matching Threshold
DS-K1T981 Series Access Control Terminal User Manual
106