Set the matching threshold when authencang via 1:1 matching mode. The larger the value,
the smaller the false accept rate and the larger the false rejecon rate.
1:N Matching Threshold
Set the matching threshold when authencang via 1:N matching mode. The larger the value,
the smaller the false accept rate and the larger the false rejecon rate.
Face Recognion Timeout Value
Set the meout value when face recognizing. If the face recognion me is longer than the
congured value, the system will pop up a prompt.
ECO Mode
Aer enabling the ECO mode, the device will use the IR camera to authencate faces in the low
light or dark environment. And you can set the ECO mode threshold, ECO mode (1:N), and ECO
mode (1:1).
ECO Mode Threshold
Set the ECO mode's threshold. The larger the value, the easier the device entering the ECO
mode.
ECO Mode (1:1)
Set the matching threshold when authencang via ECO mode 1:1 matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate.
E
CO Mode (1:N)
Set the matching threshold when authencang via ECO mode 1:N matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate
Enable Hard Hat Detecon
Aer enabling the hard hat detecon, you can set the strategy.
R
eminder of Wearing
If the person do not wear the hard hat when authencang, the device will pop up a prompt
and the door will open.
Mus
t Wear
If the person do not wear the hard hat when authencang, the device will pop up a prompt
and the door will keep closed.
Face with Mask Detecon
Aer enabling the face with mask detecon, the system will recognize the captured face with
mask pictur
e. You can set face with mask1:N matching threshold, it's ECO mode, and the
strategy.
None
The device will detect the face with mask without prompt.
Reminder of Wearing
DS-K1T981 Series Access Control Terminal User Manual
107