6. Apply Silicone sealant among the joints between the device and the wall (except
the lower side) to keep the raindrop from entering.
4.2 Install Door Staon with Sub Module
Note
●
Accessories that you need to prepare for installaon: Mounng template,
mounng plate and gang box.
●
Wire the cables during installaon.
●
The installaon steps of door staon with dierent sub modules are the same,
and here takes door staon with ngerprint module for example.
4.2.1 Installaon Accessory
Mounng Template
Figure 4-12 Mounng Template
The dimensions of the mounng template is 113.5 mm (W) × 214 mm (H).
Video Intercom Face
Recognion Door Staon User Manual
16