HIKVISION DS-KD9633-WBE6 - Display Settings

9.4.5 Display Sengs
Congure the image adjustment, backlight sengs and other parameters in display
sengs.
Steps
1. Click Image → Display
Sengs to enter the display sengs page.
Figure 9-14 Display Sengs
2. Select the Format.
3. Set the display parameters.
WDR
Wide Dynamic Range can be used when there is a high contrast of the bright
area and the dark area of the scene.
Brightness
Brightness describes bright of the image, which ranges from 1 to 100.
Contrast
Contrast describes the contrast of the image, which ranges from 1 to 100.
Saturaon
Saturaon
describes the colorfulness of the image color, which ranges from 1
to 100.
Sharpness
Sharpness describes the edge contrast of the image, which ranges from 1 to
100.
4. Click Day/Night Switch to set the parameters.
Video Intercom Face
Recognion Door Staon User Manual
73