HIKVISION DS-KD9633-WBE6 - Local Configuration; Quick Configuration

7 Local Conguraon
7.1 Quick Conguraon
Aer acvang the device, the quick conguraon page will pop up automacally.
Steps
1. Select the system language and tap NEXT.
Figure 7-1 Select Language
2. Set network parameters and tap NEXT.
-
Select Wired Network and set the IP address, Subnet Mask and Gateway
manually. Or you can enable DHCP, the device will get network parameters
automacally.
Video Intercom Face
Recognion Door Staon User Manual
29