HIKVISION DS-KD9633-WBE6 - Smart Settings

Note
●
Up to 4 elevator controllers can be connected to one door staon.
●
Up to 10 negave oors can be added.
●
Make sure the interface types of elevator controllers, which are connected to
the same door staon are consistent.
RS-485 Sengs
Set the working mode to linked device.
Steps
1. Click Access Control → RS-485 to enter the
sengs page.
Figure 9-23 RS-485 Sengs
2. Select the No.
3. Select the working mode.
4. Click Save to enable the
sengs.
9.4.9 Smart
Sengs
Biometrics Sengs
Adjust the face recognion parameters and ngerprint parameters according to your
needs.
Steps
1. Click Smart to enter the sengs page.
2. Enable face
an-spoong to edit face capture advanced parameters.
Video Intercom Face
Recognion Door Staon User Manual
81