HIKVISION DS-KD9633-WBE6 User Manual

Figure 9-22 Elevator Control
2. Check to enable elevator control funcon.
3. Select an Elevator No., and select an elevator controller type for the elevator.
4. Select Interface Type.
Note
If you select Interface Type as RS-485, you only need to enter Negave Floor
Capacity.
5. Enter Negave Floor Capacity, and select Alarm Receiver Type.
6. Enter the elevator controller's Server IP Address, Port No., User Name, and
Password.
7. Click Save to enable the sengs.
Video Intercom Face
Recognion Door Staon User Manual
80

HIKVISION DS-KD9633-WBE6 Specifications

General

Brand	HIKVISION
Model	DS-KD9633-WBE6
Category	Intercom System
Language	English