HIKVISION DS-KD9633-WBE6 - Device Management

Figure 9-2 Add User
1) Enter Person ID, Name, Floor No.andRoom No.. Select Level.
2)
Congure Start Time and End Time.
3) Check Administrator and the person added will be able to log in by face
recognion.
4) Click Add Card, enter Card No. and select Property. Or you can click Read and
place the card on the card-reding zone.
5) Click Capture and make sure the face image of the person can be captured
properly. Or you can click + to upload local images.
Note
The picture format should be JPG, JPEG or PNG, and the size should be less than
200 k.
6) Click OK to complete person adding.
3. Delete or edit users.
-
Select users and click Delete to delete users.
-
Click to edit user informaon.
4.
Input keywords in the bar and click to search users, and the qualied users will
be displayed on the result list.
9.3 Device Management
Video Intercom Face Recognion Door Staon User Manual
55