HIKVISION DS-KD9633-WBE6 - Connect to Wi-Fi

Steps
1. On the menu, tap Network → Wired Network to enter the sengs page.
Figure 7-9 Wired Network Sengs
2. Edit the wired network parameters.
-
Edit the wired network parameters manually.
-
Enable DHCP, and the system will get the parameters
automacally.
7.3.2 Connect to Wi-Fi
Before You Start
Authencate and enter the menu rst. Refers to Authencaon via Admin for
details.
Steps
1. On the menu, tap Network → Wi-Fi to enter the sengs page.
Video Intercom Face
Recognion Door Staon User Manual
37