HIKVISION DS-KD9633-WBE6 - Page 79

Steps
1. Click Network → Basic Sengs → Port to enter the sengs page.
2. Set the ports of the device.
HTTP Port
The default port number is 80, and it can be changed to any port No. which is
not occupied.
HTTPS Port
The default port number is 443, and it can be changed to any port No. which is
not occupied.
RTSP Port
The default port number is 554.
Server Port
The default server port number is 8000, and it can be changed to any port No.
ranges from 2000 to 65535.
3. Click Save to enable the
sengs.
SIP Seng
Steps
1. Click Network → Basic
Sengs → SIP to enter the sengs page.
Video Intercom Face
Recognion Door Staon User Manual
66