HIKVISION DS-KD9633-WBE6 - Page 96

Parameter Descripon
Face Recognion
Timeout Value
When the face recognion me exceed the value you set,
the recognion will be determined as a meout operaon.
Note
You can input the number from 1 to 20.
ECO Sengs Aer enabling the ECO mode, the device will use the IR
camera to authencate faces in the low light or dark
environment. And you can set the ECO mode threshold,
ECO mode (1:N).
ECO Threshold
When enabling the ECO mode, you can set the ECO
mode’s threshold. The larger the value, the easier the
device entering the ECO mode.
Note
You can input the number from 1 to 7.
ECO Mode (1:N)
Set the matching threshold when authencang via
ECO mode 1:N matching mode. The larger the value,
the smaller the false accept rate and the larger the false
rejecon rate.
Note
You can input the number from 1 to 100.
Force to Enable Night Mode
When the environment is not bright enough, you can
slide to force to enable the night mode.
3. Click Save to enable the sengs.
Area
Conguraon
Click VCA Conguraon → Area Conguraon to enter the sengs page.
Video Intercom Face
Recognion Door Staon User Manual
83