NVR User Manual 061220NA 105
NOTE: Time periods cannot repeat or overlap.
Figure 150, Set Arming Schedule of Alarm Output
5. Repeat the above steps to set up arming schedule of other days of a week. You can also use the Copy
button to copy an arming schedule to other days.
6. Click the OK button to complete the video tampering settings of the alarm output no.
7. You can also copy the above settings to another channel.
Figure 151, Copy Settings of Alarm Output
8.7 Triggering or Clearing Alarm Output Manually
Purpose
Sensor alarm can be triggered or cleared manually. If “Manually Clear” is selected in the dwell time drop-
down list of an alarm output, the alarm can be cleared only by clicking the Clear button in the following
interface.
1. Select the alarm output you want to trigger or clear, and make related operations, Menu > Manual >
Alarm.
2. Click the Trigger/Clear button if you want to trigger or clear an alarm output.
3. Click the Trigger All button if you want to trigger all alarm outputs. Click Clear All button if you want to
To Next Page
Loading...
Need help?
General
