NVR User Manual 061220NA 93
Figure 129, Export Finished
NOTE: The backup of video files using USB writer or SATA writer has the same operating
instructions. Please refer to steps described above.
7.1.3
Backing up by Event Search
Purpose
Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer), SATA writer,
or eSATA HDD. Quick Backup and Normal Backup are supported.
1. Enter the Export interface, Menu > Export > Event.
2. Select the cameras to search.
3. Set the event type to alarm input, motion, or VCA.
Figure 130, Event Search for Backup
4. Set the search conditions, and click the Search button to enter the search result interface. For the
POS event type, you can also set the Keyword and enable the Case Sensitivity (upper case and lower
case) to search the video files with the key word containing the POS information.
5. The matched video files are displayed in Chart or List display mode. Select video files from the Chart or
List interface to export.
To Next Page
Loading...
Need help?
General
