NVR User Manual 061220NA 136
Figure 203, Confirm Initialization
5. Select the OK button to start initialization.
Figure 204, Status changes to Initializing
6. After the HDD has been initialized, the status of the HDD will change from
Uninitialized
to
Normal
.
Figure 205, HDD Status Changes to Normal
NOTE: Initializing the HDD will erase all data on it.
12.2 Managing Network HDD
Purpose
You can add an allocated NAS or IP SAN disk to the NVR and use it as a network HDD. Up to eight network
disks can be added.
1. Enter the HDD Information interface, Menu > HDD > General.
Figure 206, HDD Information Interface
2. Click the Add button to enter the Add NetHDD interface.
To Next Page
Loading...
