NVR User Manual 061220NA 137
Figure 207, HDD Information Interface
3. Add the allocated NetHDD.
4. Set the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
• Add NAS Disk
1) Enter the NetHDD IP address in the text field.
2) Click the Search button to search for available NAS disks.
3) Select the NAS disk from the list shown, or manually enter the directory in the NetHDD Directory
text field.
4) Click the OK button to add the configured NAS disk.
Figure 208, Add NAS Disk
• Add IP SAN
1) Enter the NetHDD IP address in the text field.
To Next Page
Loading...
