NVR User Manual 061220NA 134
Click the Status button on the lower-right corner of the page.
Figure 198, Network Status Checking
If the network is normal, the following message box pops out.
Figure 199, Network Status Checking Result
If the message box pops out with other information instead of this one, you can click the Network button
to show the quick setting interface of the network parameters.
11.4.4
Checking Network Statistics
Purpose
You can check the network status to obtain real-time information of the NVR.
1. Enter the Network Detection interface, Menu > Maintenance > Net Detect.
2. Choose the Network Stat. tab.
To Next Page
Loading...
