NVR User Manual 061220NA 21
2. In the IP Camera Activation text field, enter the password to activate the IP camera(s) connected to the
device.
3. Click OK to save the password and activate the device.
4. When the device is activated, the system pops up the message box to remind you to remember the
password. Click Yes to continue to export the GUID file for the future password resetting.
Figure 8, Export GUID File Remind
5. Insert the USB flash disk into your device, and export the GUID file to the USB flash disk in the Reset
Password interface. Please see
Resetting Your Password
for password resetting instructions.
Figure 9, Export GUID File
NOTE: Please keep your GUID file properly for future password resetting.
If the Admin’s password is modified, the following menu pops up. Optionally, click the Yes
button to duplicate the password to IP cameras that are connected with the default
protocol.
Figure 10, Attention Interface
2.1.3
Using the Unlock Pattern for Login
The Admin user can configure the unlock pattern for device login.
To Next Page
Loading...
Need help?
General
