NVR User Manual 061220NA 141
Figure 216, Storage Mode Settings Interface
3. Select a camera for which you want to configure quota.
4. Enter the storage capacity in the Max. Record Capacity (GB) and Max. Picture Capacity (GB) text fields.
Figure 217, Configure Record/Picture Quota
5. You can copy the quota settings of the current camera to other cameras if required. Click the Copy
button to enter the Copy Camera menu.
Figure 218, Copy Settings to Other Camera(s)
6. Select the camera(s) to be configured with the same quota settings. You can also click the IP Camera
checkbox to select all cameras.
7. Click the OK button to finish the Copy settings and go back to the Storage Mode interface.
8. Click the Apply button to apply the settings.