NVR User Manual 061220NA 145
Figure 225, S.M.A.R.T. Settings Interface
The related S.M.A.R.T. information is shown on the interface.
You can choose self-test types as Short Test, Expanded Tes, or Conveyance Test.
Click the start button to start the S.M.A.R.T. HDD self-evaluation.
NOTE: If you want to use the HDD even when the S.M.A.R.T. checking has failed, check the
Continue to use the disk when self-evaluation is failed checkbox.
Bad Sector Detection
1. Click the Bad Sector Detection tab.
2. Select the HDD no. in the drop-down list you want to configure, and choose All Detection or Key Area
Detection as the detection type.
To Next Page
Loading...
Need help?
General
