NVR User Manual 061220NA 156
1. Enter the General Settings interface, Menu > Configuration > General.
2. Select the General tab.
Figure 241, General Settings Interface
3. Configure the following settings:
• Language: The default language used is
English
.
• O
utput Standard: Select the output standard to NTSC or PAL, which must be the same as the video
input standard.
• Resolution: You can configure the VGA resolution and HDMI resolution respectively. Up to 4K (3840 ×
2160) resolution is selectable for the HDMI output.
• Time Zone: Select the time zone.
• Date Format: Select the date format.
• System Date: Select the system date.
• System Time: Select the system time.
• Mouse Pointer Speed: Set the speed of mouse pointer; four levels are configurable.
• Enable Wizard: Enable/disable the Wizard when the device starts up.
• Enable Password: Enable/disable the use of the login password.
4. Click the Apply button to save the settings.
To Next Page
Loading...
