HIKVISION EKI-K82T46 User Manual

NVR User Manual 061220NA 16
Table 1-4 IR Remote Functions
No.
Name
Function Description
1
POWER
ON/OFF
•
To Turn Power On:
- If User Has Not Changed the Default NVR Device ID# (255):
1. Press Power On/Off button (1).
- If User Has Changed the NVR Device ID#:
1. Press DEV button.
2. Press Number buttons to enter user-defined Device ID#.
3. Press Enter button.
4. Press Power button to start device.
• To Turn NVR Off:
- If User Is Logged On:
1. Hold Power On/Off button (1) down for five seconds to display the “Yes/No” verification prompt.
2. Use Up/Down Arrow buttons (12) to highlight desired selection.
3. Press Enter button (12) to accept selection.
- If User Is
Not Logged On:
1. Hold Power On/Off button (1) down for five seconds to display the user name/password prompt.
2. Press the Enter button (12) to display the on-screen keyboard.
3. Input the user name.
4. Press the Enter button (12) to accept input and dismiss the on-screen keyboard.
5. Use the Down Arrow button (12) to move to the “Password” field.
6. Input password (use on-screen keyboard or numeric buttons (3) for numbers).
7. Press the Enter button (12) to accept input and dismiss the on-screen keyboard.
8. Press the OK button on the screen to accept input and display the Yes/No” verification prompt (use
Up/Down Arrow buttons (12) to move between fields)
9. Press Enter button (12) to accept selection.
User name/password prompt depends on NVR is configuration. See “System C
onfiguration”
section.
2 DEV
Enable
IR Remote
: Press DEV button, enter NVR Device ID# with number keys, pre
ss Enter to pair unit with the
NVR
Disable
IR Remote
: Press DEV button to clear Device ID#; unit will no longer be
paired with the NVR
3 Numerals
Switch to the corresponding channel in Live View or
PTZ
Control mode
Input numbers in Edit mode
4 EDIT
Delete characters before
cursor
Check the checkbox and select the ON/OFF switch
5 A
Adjust focus in the
PTZ
Control menu
Switch on
-
screen keyboards (upper and lower case alphabet, symbols, and numer
als)
6 REC
Enter Manual Record setting menu
Call a
PTZ
preset by using the numeric buttons in
PTZ
control settings
Turn audio on/off in Playback mode
7 PLAY
Go to Playback mode
Auto scan in the
PTZ
Control menu
8
INFO
Reserved
9
VOIP
Switches between main and spot output Zooms out the image in
PTZ
control mode
10 MENU
Return to Main menu (after successful login)
N/A
Show/hide full screen in Playback mode
12
DIRECTION
Navigate between fields and menu items
Use Up/Down buttons to speed up/slow down recorded video, and Left/Right
buttons to
advance/rewind 30 secs
in Playback mode
Cycle through channels in Live View mode
Control
PTZ
camera movement in
PTZ
control mode
ENTER
Confirm selection in any menu mode
Checks checkbox
Play or pause video in Playback mode
Advance video a
single frame in single
-
frame Playback mode
Stop/start auto switch in auto
-
switch mode
13
PTZ
Enter
PTZ
Control mode
14 ESC
Go back to previous screen
N/A
15
RESERVED
Reserved
16 F1
Select all items on a list
N/A
Switch between play and
reverse play in Playback mode
17
PTZ
Control
Adjust
PTZ
camera iris, focus, and zoom
18 F2
Cycle through tab pages
Switch between channels in Synchronous Playback mode
Troubleshooting Remote Control
Make sure you have installed batteries properly in the remote control, and you have to aim the remote
control at the IR receiver in the front panel.
If there is no response after you press any button on the remote, follow the procedure below to
troubleshoot.

HIKVISION EKI-K82T46 Specifications

General

Brand	HIKVISION
Model	EKI-K82T46
Category	Network Hardware
Language	English