NVR User Manual 061220NA 163
• Admin: You are allowed only to edit the password and MAC address. Check the Change Password
checkbox if you want to change the password, input the correct old password and the new
password in the Password and Confirm text fields.
STRONG PASSWORD RECOMMENDED − We highly recommend that you create a strong password
of your own choosing (using a minimum of eight characters, including at least three of the
following categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. We also recommend that you
reset your password regularly. Especially in high security systems, resetting the password
monthly or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
5. Edit the unlock pattern for the admin user account.
1) Check the Enable Unlock Pattern checkbox to enable the use of an unlock pattern when logging in
to the device.
2) Use the mouse to draw a pattern among the nine dots on the screen. Release the mouse when the
pattern is done.
NOTE: Refer to
Configuring the Unlock Pattern
for detailed instructions.
Figure 251, Set Unlock Patter for Admin User
6. Click the of Export GUID to enter the reset password interface to export the GUID file for the admin
user account.
When the admin password is changed, you can re-export the GUID file to the connected USB flash disk
for future password resetting. Refer to
Resetting Your Password
for details.
7. Click the OK button to save the settings and exit the menu.
8. For the Operator or Guest user account, you can also click the button on the user management
interface to edit the permission.
To Next Page
Loading...
