Hill-Rom Prima Procedural Light User Manual

4.2 Caster
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 6 Prima™ Procedural Light Service Manual (man247ra)
DRAFT 6/4/99
3. Pulling firmly, remove the caster (B) from the base (A).
Replacement
1. Pressing firmly, install the caster (B) onto the base (A).
NOTE:
There are four casters mounted to the base, two with brakes and two free
swivel. The casters with brakes are positioned to the back of the base nearest
the power cord retainer clip (C). When replacing a caster (B), make sure to
place the free swivel casters to the front, and the casters with brakes to the
back.
2. Return the Prima™ Procedural Light to its upright operational position.

Hill-Rom Prima Procedural Light Specifications

General

Brand	Hill-Rom
Model	Prima Procedural Light
Category	Medical Equipment
Language	English