Page 94 194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use
• earthing of the metal parts of the bed,
• waterproofing of electrical parts,
• protection of the (CAN) connector outside maintenance
operation,
• siderails: check the play and the lock mechanisms
(condition and working order),
• weigh system and bed exit alerts system: frequency
r
egarding national regulations.
Every year, it is preferable to ask Hill-Rom After-Sales
Service or a Hill-Rom approved supplier to inspect the actuators and the electrical
systems in order to keep them in safe and good working order over time.
Depending on the maintenance operations and observations, the date of the next
inspection must be recommended every time the device is serviced.
Batteries
• If the system detects that the comfort and/or emergency batteries
are totally flat, the amber battery charge light on the caregiver
keypads in the head half-siderails flashes and the fault-
maintenance ind.icator light comes on. They must be immediately
recharged
.
End-of-life equipment
The bed and its accessories should be cleaned and disinfected before de-
commissioning.
Customers should adhere to all federal, state, regional, and/or local laws
and regulations as it pertains to the safe disposal of medical devices and
accessories. If in doubt, the user of the device shall first contact Hill-Rom
Technical Support for guidance on safe disposal protocols (Directive
2012
/19/EU).
•
As regards the battery,
never dispose of the batteries which contains
substances and dangerous metals for the environment and the health
(Dir
ective 2006/66/EEC).
All components complies with Substances of Very High Concern (SVHC)
Regulation (Directive 1907/2006/EEC) on Registration, Evaluation and
Authorization and Restriction of Chemicals (REACH), except the GCI™ parts in
the tables below.
Description: XTAL 25.0MHZ 30PPM R
Part Number: ABM7-25.000MHZ-D2Y-T
Manufacturer: ABRACON CORP
Substance Identification:
Diboron trioxide / Lead monoxide (lead oxide)
Substance Concentration:
3767 ppm / 105766 ppm
Substance Location:
Screen part of the CGI™ / Screen part of the CGI™