194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use Page 79
Help with care
Monitor stand (AD244B)**
Safe working load: 15 kg
(1)
The monitor stand fits int
o the sockets at the
foot of the bed.
When fitting the monitor, ensure that the
folded table is located on the outer edge of
the bed.
The table must be folded away when
moving the bed.
If the bed is in Trendelenburg or Reverse
Trendelenburg, any devices must be
placed on the monitor stand.
To fit a monitor stand:
1. The safe working load specifications allow for a substantial safety margin.