194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use Page 29
Mobilizing the patient
Mobilizing the patient
Electrical Functions Controls
The bed’s power-driven movements are controlled using the controls built into the half-
siderails or bilateral HiLow pedals* with caregiver mode* or the control pendant* by
pressing and holding the button for the corresponding function. The movement stops
when the button is released or when the limit of movement is reached.
Caregivers need to assess whether patients can be left unattended with access to
the functions provided.
Caregiver half-siderail controls
They are placed outside the head half-
siderails on either side of the bed. They
are to be used by caregivers.
Patient half-siderail controls
They are placed inside the head half-siderails on
either side of the bed. They are to be used by the
patient.
Control pendant*
The control pendant can be stored on the siderail.
If the patient-pendant is positioned so as to stretch the coil cord and
it is released, it retracts and can impact someone.
To Next Page
Loading...
Need help?
General
