Page 58 194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use
Wi-Fi Connection Module (WCM) - AD315A**
ON/OFF
Light
Wi-Fi
Light
Server Connection
Light
Bed Location
Light
ON/OFF
Button
Identification
To identify your MCW AD315A model, its serial number SN (XXSEXXXXXX) and its date of
manufacture, refer to the identification label on the back of the module.
• REF: ET315AXXXXXXX; ET315 = Module WCM; A = Révision; XXXXXXX= a
unique 7-figure numerical code according configuration.
WCM module Positioning
On installation or after cleaning (if it has been removed), it is necessary to place the unit in
the intended location and respecting cable routing:
• to maintain the Wi-Fi performance,
• to not disturb the scale operation,
• to avoid creating new entrapment areas.
Connection Information
This information can be found on the label on the side of the unit
This device complies with part 15 on the FCC Rules. operation is subject to the
following two condition: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
To Next Page
Loading...
Need help?
General
