194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use Page 35
Mobilizing the patient
Mechanical adjustable foot section
The foot section can be placed in four different positions and is held in place by
mechanical notches.
To raise the foot section:
To lower the foot section:
Patient helpers**
This accessory must only be fitted at the head of the bed.
Fixed patient helper - AD810A
Safe working load: 75 kg
(1)
Do not position the patient helper at the outside of the bed. See incorrect position
shown below.
The patient helper can be fitted into either of the two square sockets at the head of the
bed.
Correct position
Incorrect position
1. The safe working load specifications for normal use allow for a substantial safety margin.
To Next Page
Loading...
Need help?
General
