Page 30 194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use
Bilateral HiLow pedal with caregiver mode*
The HiLow pedals are positioned on each side on the
chassis. They are to be used by caregivers.
Raising/lowering the sleep surface
Before using this function, check that no obstacles (e.g., objects, accessories,
power cables) or persons (especially children) are under the sleep surface and that
none of the patient’s limbs protrude beyond the edges of the sleep surface. An
intermittent beep sounds when one of the bed’s movements is hindered.
When descending to the low position, make sure that:
- the drainage devices do not come into contact with the floor.
- the elevation arms do not hit the chassis of the Viking XL patient hoist if the bed is
equipped with 125 mm diameter casters*.
Use the HiLow feature of the sleep surface to adjust the bed to the required height
when the patient must be moved.
To Next Page
Loading...
Need help?
General
