194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use Page 83
Help with care
5. Lift the cassette retaining bar and insert the cassette in the landscape or portrait
direction, as required.
6. Check that the retaining bar locks the cassette in position.
7. For portrait images, pull the retaining bar upwards to lock the cassette.
8. If necessary, adjust the cassette in the sideways direction.
9. Adjust the position of the cassette using the right and left straps so that the
r
etaining bar is positioned on the edge of the mattress.
10. Adjust the cassette positioning buckle. Wind the right strap around the mattress
and put the buckle on the upper edge of the mattress. Once it has been adjusted
using the right and left straps, this buckle is used to position the top of the
cassette as required.
11. Position the patient on the bed with their hips by the marker on the siderail.
12. Adjust the height of the sleep surface and inclin
e the head section as required.
To Next Page
Loading...
Need help?
General
