Need help?Do you have a question about the HIMA Himax X-COM 01 and is the answer not in the manual?
General| Brand | HIMA |
|---|---|
| Model | Himax X-COM 01 |
| Category | Conference System |
| Language | English |
Lists product name, conformity marks, part number, revision index, voltage, and production year.
Illustrates internal connections of fieldbus submodules, processor, and Ethernet interfaces.
Handles self-tests, communication, and stores error history; integrated Ethernet switch.
Details ports, speed, duplex, connection socket, IP/subnet, and supported protocols.
Shows the location and types of LEDs for status indication on the module.
Defines status (On, Off, Blinking) and description for Run, Error, Stop, Init LEDs.
Explains Ess and Red LEDs for fieldbus redundancy status.
Details A, B, and A+B LEDs for physical and logical system bus connections.
Describes LED status (On, Off, Blinking) for Fieldbus 1, 2, and Fault.
Explains Eth 1-4 and H/F/Col LEDs for Ethernet link and activity status.
Details designations and descriptions for fieldbus and Ethernet interface connections.
Step-by-step guide for opening fan rack, inserting, swiveling, and securing the module.
Step-by-step guide for opening fan rack, releasing screw, and swiveling module out.
Explains how to access the communication module's detail view in SILworX.
Details settings for Name, CPU budget, IP address, subnet mask, and gateway.
Sets port speed, flow control, autonegotiation, and packet limits.
Lists standard UDP/TCP ports for SNTP, Modbus, safeethernet, OPC, and SILworX.
Explains LED indicators and SILworX for module state and diagnostic history.
To Next Page
