X-COM 01  2 Safety 
HI 801 011 E Rev. 5.00  Page 9 of 42 
2.2  Residual Risk 
No imminent risk results from a HIMax system itself. 
Residual risk may result from: 
  Faults related to engineering 
  Faults related to the user program 
  Faults related to the wiring 
2.3  Safety Precautions 
Observe all local safety requirements and use the protective equipment required on site. 
2.4  Emergency Information 
A HIMax controller is a part of the safety equipment of a system. If the controller fails, the 
system adopts the safe state. 
In case of emergency, no action that may prevent the HIMax systems from operating safely is 
permitted.