HIMA Himax X-COM 01 - Fieldbus Interface Details; Fieldbus Interface Usage Requirements

X-COM 01 3 Product Description
HI 801 011 E Rev. 5.00 Page 21 of 42
3.6.2 Fieldbus interfaces
Fieldbus interfaces of the COM module can be used to communicate with external systems.
Only one protocol can be run on each fieldbus interface.
The fieldbus interfaces must be equipped with a fieldbus submodule. If no fieldbus submodule is
used, communication is not possible on this interface. The transfer standard for the interface
depends on the fieldbus submodule.
Refer to the communication manual (HI 801 101 E) for details of the fieldbus interfaces.