HIMA Himax X-COM 01 - 1 Introduction; Structure and Use of the Manual; Target Audience; Table 1: Additional Valid Manuals

X-COM 01 1 Introduction
HI 801 011 E Rev. 5.00 Page 5 of 42
1 Introduction
The present manual describes the technical characteristics of the module and its use. It
provides information on how to install, start up and configure the module in SILworX.
1.1 Structure and Use of the Manual
The content of this manual is part of the hardware description of the HIMax programmable
electronic system.
This manual is organized in the following main chapters:
 Introduction
 Safety
 Product Description
 Start-up
 Operation
 Maintenance
 Decommissioning
 Transport
 Disposal
Additionally, the following documents must be taken into account:
Name
Content
Document no.
HIMax
System Manual
Hardware description of the
HIMax system
HI 801 001 E
HIMax
Safety Manual
Safety functions of the HIMax
systems
HI 801 003 E
HIMax
Communication Manual
Description of communication
and protocols
HI 801 101 E
SILworX Online Help (OLH)
Instructions on how to use
SILworX
-
First Steps
Introduction to SILworX
HI 801 103 E
Table 1: Additional Valid Manuals
The latest manuals can be downloaded from the HIMA website at www.hima.com. The revision
index on the footer can be used to compare the current version of existing manuals with the
Internet edition.
1.2 Target Audience
This document addresses system planners, configuration engineers, programmers of
automation devices and personnel authorized to implement, operate and maintain the devices
and systems. Specialized knowledge of safety-related automation systems is required.