Hioki BT3562-01 - Selecting the Interface

8.3 Selecting the Connections and Protocol
99
8
Chapter 8 RS-232C/GP-IB Interfaces
Selecting the Interface
1
(The SHIFT indicator lights up.)
The Menu display appears.
2
Select the Interface Selection display.
See "1.4 Menu Display Sequence (SHIFT → ENTER)" (⇒ p.13).
3
Select RS-232C or GP-IB on the Sub Display.
rS............RS-232C
GP-Ib......GP-IB (Model BT3562-01, BT3563-01 only)
Prn..........Printer
When you select RS-232C, set the communications speed.
When selecting GP-IB, also set the
Address and Message Terminator .
4
Applies settings and returns to the Measurement display.
(Main Display)
(Sub Display)
The current setting blinks.
(Sub Display)
(Sub Display)
Message Terminator setting (LF/CRLF)
Address setting (0 to 30)
Selects the item to set
Setting