1.5 Measurement Flowchart
14
The basic measurement process flow is as follows:
For details about the functions that can be applied to measurement values such
as comparator, trigger and averaging functions, refer to "Chapter 4 Applied
Measurement" (⇒ p.37).
1.5 Measurement Flowchart
Selecting the line frequency (⇒ p.20)
Turning the power on (⇒ p.18)
Connecting the test leads (⇒ p.17)
Connecting the power cord (⇒ p.16)
Selecting sampling rate (⇒ p.30)
Selecting measurement range (⇒ p.27)
Selecting measurement mode (⇒ p.26)
Executing zero-adjustment
Short the test leads together (⇒ p.31)
Measurement Preparations
Instrument’s Settings
Zero-Adjustment
Read the measured value (⇒ p.34)
Connect the test leads to a test object.
Measurement Start
To Next Page
Loading...
