Hioki BT3562-01 - Introduction; Verifying Package Contents

Introduction
1
Thank you for purchasing the HIOKI “Model BT3562, BT3562-01, BT3563, BT3563-01 BATTERY
HiTESTER.” To obtain maximum performance from the instrument, please read this manual first,
and keep it handy for future reference.
This manual uses the following conventions:
The Model BT3562, BT3562-01, BT3563, and BT3563-01 are referred to as "the instrument."
Unless otherwise noted, the Model BT3562 and BT3562-01 are referred to collectively as "Model BT3562,"
while the Model BT3563 and BT3563-01 are referred to collectively as "Model BT3563."
When you receive the instrument, inspect it carefully to ensure that no damage occurred during
shipping. In particular, check the accessories, panel switches, and connectors. If damage is evident,
or if it fails to operate according to the specifications, contact your dealer or Hioki representative.
Use the original packing materials when transporting the instrument, if possible.
Options  Model L2107 CLIP TYPE LEAD(70 VDC or less)
 Model 9453 FOUR TERMINAL LEAD (60 VDC or less)
 Model 9467 LARGE CLIP TYPE LEAD (50 VDC or less)
 Model 9770 PIN TYPE LEAD (70 VDC or less)
 Model 9771 PIN TYPE LEAD (70 VDC or less)
 Model L2100 PIN TYPE LEAD (600 VDC or less)
 Model 9454 ZERO ADJUSTMENT BOARD
 Model 9637 RS-232C CABLE (9-pin to 9-pin/cross cable)
 Model 9638 RS-232C CABLE (9-pin to 25-pin/cross cable)
 Model 9151-02 GP-IB CONNECTOR CABLE (2 m)
Introduction
Verifying Package Contents
Confirm that these contents are provided. (One each)
 Model BT3562/ Model BT3562-01 (GP-IB version)
BATTERY HiTESTER
Model BT3563/ Model BT3563-01 (GP-IB version)
BATTERY HiTESTER
 Power Cord
 Instruction Manual