Hioki BT3562-01 - Initialization Items; Local Function

8.4 Communication Methods
110
*1: Only the MAV bit (bit 4) is cleared.
*2: All bits except the MAV bit are cleared.
*3: Except the PON bit (bit 7).
During communications, REMOTE is lit to indicate the remote control state.
To cancel the
Remote state
Initialization Items
: initialized, − : not initialized
Initialization Method
Item
At Power-
on
∗RST
Command
Device
Clear
∗CLS
Command
Device-specific functions
(Range, etc.)
−

−−
Output Queue

−

−
Input buffer

−

−
Status Byte Register

−
−
*1

*2
Event registers

*3
−−

Enable register

−−−
Current path

−

−
Headers on/off


−−
Local Function
REMOTE off
• Remote control can be canceled by pressing the SHIFT key and then the
AUTO key.
• If the Local Lock Out (p.109) GP-IB command has been issued, the
Remote state cannot be canceled.