Hioki BT3562-01 - Key-Lock Function

4.7 Key-Lock Function
66
Executing Key-Lock disables the operating keys on the front of the instrument.
This function can be useful for protecting settings.
Disabling the Memory Function
1
Send the command to enable the Memory function Off.
:MEMory:STATe OFF
2
The Memory function is disabled. (MEM not lit)
4.7 Key-Lock Function
(The SHIFT indicator lights up.)
Enable the Key-Lock function.
LOCK lit
• Even if the power supply is interrupted, the Key-Lock function is not can-
celed.
•The TRIG key remains operational.
Disabling Key-Lock
(The SHIFT indicator lights up.)
Disable the Key-Lock function. (LOCK is not lit)
When communicating by remote control, the remote control status is canceled.