Hioki BT3562-01 - 2.4 Turning the Power On and Off

1.4 Menu Display Sequence (SHIFT → ENTER)
13
1
Chapter 1 Overview
Various auxiliary settings can be performed from the menu item displays.
1.4 Menu Display Sequence (SHIFT → ENTER)
ERR Output Selection
display (
⇒ p.80)
Zero-Adjustment Clear
display (
⇒ p.31)
Interface Selection
display (
⇒ p.99)
Self-Calibration setting
display (
⇒ p.69)
Measurement Value Output
function setting display
(⇒ p.70)
Key Beeper setting
display (
⇒ p.71)
Line Frequency set-
ting display
(
⇒ p.20)
Measurement Current
Pulse Output
display(
⇒ p.57)
(SHIFT Lamp lit)
The Menu display appears.
(Main Display)
The up/down RANGE key changes the setting
shown on the Sub Display.
Pressing this key returns to the
previous item display.
EOM-signal setup dis-
play (
⇒ p.80)
Configuring the Absolute
Value Judgment display
(⇒ p.51)
Reset display
(
⇒ p.72)
Settings on the menu item displays are applied and saved internally when
changed.