3.3 Selecting Measurement Mode
26
Select the measurement mode from ΩV (both resistance and voltage measurement), Ω (resistance measure-
ment only) or V (voltage measurement only).
3.3 Selecting Measurement Mode
1
Confirm the SHIFT lamp is not lit.
If this is lit, press the SHIFT key to turn it off.
2
Switches the displayed measurement mode.
Each key-press switches the measurement mode.
ΩV mode
(Resistance and Voltage measurement) measurement)
Ω mode
(Resistance measurement)
V mode
(Voltage measurement)
“Ω” or “mΩ” lit
“ΩV” indicates the
ΩV mode is selected
The fastest measurements are provided by selecting the Ω or V mode when
measuring resistance or voltage, respectively.
See " Sampling Time" (⇒ p.172).
To Next Page
Loading...
