Hioki BT3562-01 - Page 135

8.6 Message Reference
131
8
Chapter 8 RS-232C/GP-IB Interfaces
Query Comparator Judgment Results
(Resistance Measurement)
Syntax
Query
:CALCulate:LIMit:RESistance:RESult?
Response <HI/ IN/ LO/ OFF/ ERR>
Example
Query
:CALC:LIM:RES:RES?
Response
HI
(Voltage Measurement)
Syntax
Query
:CALCulate:LIMit:VOLTage:RESult?
Response <HI/ IN/ LO/ OFF/ ERR>
Set and query the comparator absolute value judgment function
Syntax
Command
:CALCulate:LIMit:ABS <1, 0, ON or OFF>
Query
:CALCulate:LIMit:ABS?
Response <ON or OFF>
ON .............. Absolute value judgment function on
OFF............. Absolute value judgment function off
Note
The absolute value is only taken for voltage measured values.